Attached to this article are installation guides for all of our major Telematics Devices.
As a general overview however, for simple installations, devices are wired as follows.
Syrus 4G
- 12/24v VDC supported
- Red Wire - Vehicle Battery Power
- Black Wire - Vehicle Ground
- Yellow Wire - Vehicle Ignition
Syrus 3G
- 12/24v VDC supported
- Red Wire - Vehicle Battery Power
- Black Wire - Vehicle Ground
- Yellow Wire - Vehicle Ignition
Bigmate 720, Bigmate 2620/2630
- 12/24v VDC supported
- Red Wire - Vehicle Battery Power
- Black Wire - Vehicle Ground
- White Wire - Vehicle Ignition
Bigmate 3030
- This device does not require hardwiring into the vehicle, it is merely plugged into the OBDII port.
- An ODBII Y-cable is available so that an ODBII port is still accessible for fleet/vendor debugging.
Please note that installations must be verified over the phone with our technicians to ensure that the device is reporting correctly.